Wall- and cabinet-mounting pressure control panels with fully automatic change-over function
For non-corrosive gases up to quality 5.0
Simple outlet pressure adjustment
Minimised pressure difference between left and right-hand side outlet pressure due to Ambimat
Maximum emptying of gas cylinders
Laboratory-style design
Ergonomically designed
Modular design (to be extended to 2×2, 2×3 etc. cylinders)
Filter at the process gas inlet valve
Diaphragm-type shut-off valves optimised for low internal volume with On/Off position indicator
Regulator with high control accuracy and integrated relief valve
Designed for easy installation
Tested for use with oxygen
Suitable for inlet pressure values up to 300 bar
Compact design especially for installation into safety cabinets for gas cylinders
You can order the Ambimat pressure control panel for five different outlet pressure ranges: 10 / 20 / 50 / 100 / 200 bar
The change-over pressure must always be above the minimum outlet pressure to make sure that pressure regulation is possible.
If the required outlet pressure exceeds the change-over pressure, then there is the possibility to raise the change-over pressure. Connecting the outlet of the pressure regulator with the Ambimat raises the change-over pressure by approximately 90% of the outlet pressure.
