PMI 350 TL2/2R
PMI 350 TL2/2R
The soft plasma welding machine is used for sheet metal up to 6mm. Mainly used materials for plasma welding are stainless steels, steels, titanium, zirconium and copper.
- Power source with HF-ignition
- Pilotinverter with HF-ignition
- Touch Screen 7,0″
- USB interface
- Ethernet interface
- Integrated welding program memory
- Integrated cooling
- Integrated monitoring / gaging of cooling medium
- Integrated electronic gas regulation (PGR)
- Integrated control of wire feeder / powder feeder (MCC)
- Integrated control of wire feeder / powder feeder (MCU-M)
- Integrated control of wire feeder and free wheel encoder (MCU-MI)
- Integrated control of 2 wire feeders and free wheel encoder (MCU-MSI)
- Integrated CSO – control stop
- Integrated ECO – emergency cut off
- Integrated automation interface
- Software for external controlling via computer (diagnostics, parameter setup, documentation)
- Flowmeter plasma gas
- Flowmeter shielding gas
- Parking area for 20l gas bottle
- Mobility by wheels
- Foot control of the current
- Remote Control RC-S
- HPP1 – High Pressure Pump (1 circuit)
- HPP2 – High Pressure Pump (2 circuits)
- Plate Heat Exchanger
- Remote control RC-TL2R, 7,0″ Touch Screen
| Applicable Welding Methods: | PLASMA Coating PLASMA Brazing PLASMA Keyhole Welding PLASMA Seam Welding PLASMA Powder |
| Range of suitable material thickness (Plasma seam welding): | ~ 0.5 – 3 mm |
| Range of suitable material thickness (Plasma spot welding): | ~ 0.5 – 1.5 mm |
| Automation | Capable for automation |
| Operating modes: | DC |
| Supply Voltage: | 3 × 400 V-460 V ±15 % 50/60Hz |
| Phase: | 3 Phase |
| Power connection: | 4 × 32 A CCE plug, 6 mm² |
| Max. welding current at 35 % PMI50; duty cycle (40 °C): | 350 A |
| Max. welding current at 100 % duty cycle (40 °C): | 290 A |
| Adjustment range welding current: | 3 – 350 A |
| Max. pilot current at 35 % duty cycle (40 °C): | 50 A |
| Max. pilot current at 100 % duty cycle (40 °C): | 30 A |
| Adjustment range pilot current: | 0.5 – 50 A |
| Adjustment range TIG mode: | 3 – 350 A |
| Adjustment range MMA mode: | 20 – 330 A |
| Cooling: | Liquid |
| Degree of protection: | IP 21 S |
| Length: | 1120 mm |
| Width: | 450 mm |
| Height: | 935 mm |
| Weight: | 105 kg |
| Automation Interface “Tiny”: | Included |
| Digital Inputs: | 2 × 24 V |
| Digital Outputs: | 3 × 24 V |
| Analog Inputs: | 2 × 0 – 10 V |
| Analog Outputs: | 2 × 0 – 10 V |
| CAN Bus (SBI protocol): | Included |
| Automation Interface “AS/AD Basic”: | Included |
| Digital Inputs: | 10 |
| Digital Outputs: | 10 |
| Analog Inputs: | 4 |
| Analog Outputs: | 4 |
| KTY Input: | 1 |
| CAN Interface: | Included |
| Connection cable: | 5m |
| Capability for / availability of specific bus interfaces: | Included |
