Spectrocem High pressure safety stop SP300-E (purge device optional)

Stainless steel safety shut-off device (SSD) for pressure control panels
Immediate stop of the gas supply at excessive increase of the outlet pressure
For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0
Suitable for an inlet pressure up to 300 bar
Suitable for max. outlet pressure between 1.5 and 100 bar
EU-type examination (module B, model type) according to guideline 2014/68/EU
CE certified (CE 0036)
Designed for easy installation
No extra power required (process gas controlled)
Shut-off of the gas supply near the source saves gas (no loss by venting via the waste gas line) and increases safety.
Saves installation cost – no pressure relief piping necessary
Simple reset can put the SP300 back into operation service after the fault correction

* The downstream system has to be designed for PA + 10 bar.

Inlet pressure P1:	max. 300 bar
*Max. outlet pressure P2 / Set pressure PA:**	1.5 / min. 4 bar 4 / min. 6 bar 10 / min. 16 bar 20 / min. 30 bar 50 / min. 80 bar 100 / min. 140 bar
Materials
Body:	Edelstahl 1.4404
Sealings:	EPDM or FKM
In- / outlets:	1/4“-NPT female
Temperature range:	-20°C to +60°C
Leak rate:	10-8 mbar l/s He
Cv-value:	2.2
Nominal size:	DN 5
Weight:	0.5 kg

Related products