0 Items

PRO-36 AUTO Auto Feed Mag Drill

PRO-36 AUTO Auto Feed Mag Drill

New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information.

  • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information
  • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece
  • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life
  • Tilt sensor stops the motor in machine breaks away
  • Dual bars guide system ensures extraordinary stiffness and adjustment free operation
  • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials
  • Auto-feed control stops the machine when cutter goes through
  • Protection against auto restart after power cut off
  • Compact, rigid design with ultra-lightweight of 13.5 kg
Motor Speeds: 350 rpm (under load) 580 rpm (idle run)
Power: 1020 W
Weight: 13.5 kg (30 lbs)
Max milling capacity: 36 mm (1-7/16”)
Max drilling capacity: 40 mm (1-9/16”)
Stroke: 70 mm (2-3/4″)
Max depth of cut: 51 mm (2”)
Voltage: 1~ 220–240 V, 50–60 Hz 1~ 110–120 V, 50–60 Hz
Magnetic clamping force (surface with the thickness of 25 mm and roughness Ra = 1.25): 917 kgf (9 000 N)
Magnet Base Dimensions: 80 mm × 160 mm × 38 mm 3-1/8” × 6-5/16” × 1-1/2”
Min. Workpiece Thickness: 6 mm (1/4”)
Tool holder: 19 mm (3/4”) Weldon
Product Code 220–240 V, 50–60 Hz: WRT-0672-10-20-00-0
Product Code 110–120 V, 50–60 Hz: WRT-0672-10-10-00-0
Download Brochure